All About Stenciling

I created the stencil but need it in real time so need to blow it up and then good materials to use on the wall...

you need a projector to show the image on the wall. Trace it, then tape off the pattern with painter tape and any kind of paper that won't let paint through.

Paint bomb. Just rig an IED with gallon of paint and use your cell phone to remote detonate. Good luck.

if you need to blow up an image get an overhead projector and projectit on to a piece of paper and then trace it

You can also scan it and blow it up-print it in a soft color just to see it and not use up too much ink-on multiple pages if nec. then tape them together and use a sharpie to trace them on a sheet of stencil plastic or acrylic from a plastic store so you can cut it out with a razor/exacto blade- You can also tape the plastic to the wall and shoot it up onto it with a projector to trace. I like the scanning because I can tape the print up on the wall to make sure I like the size. Use the little bottles of acrylics to stencil and I like brushes that I use to "tap" in the pattern thru the holes of the stencil. If you tap the brushes on pp towells to lessen the paint and "dry brush" it it can look like airbrush-also check out instructions on DIY networks site-very good. Have fun!