Metalworking

The World Market for Tool Holders and Self-Opening Dieheads: A 2007 Global Trade Perspective

Wed, 18 Jun 2008 18:31:09 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying tool holders and self-opening dieheads? What is the dollar value of these imports? How much do the imports of tool holders and self-opening dieheads vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of tool holders and self-opening dieheads? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported tool holders and self-opening dieheads. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Kainuun metalliteollisuuden kilpailukyky (Series C / Research Institute of Northern Finland, University of Oulu)

Wed, 18 Jun 2008 18:35:36 +0200

Price=$-0.01
Buy

Aluminum transformation technology and applications, 1981: Proceedings of the second international symposium, Buenos Aires, Argentina, August 24-26, 1981 (Materials/metalworking technology series)

Mon, 26 May 2008 18:25:34 +0200

Price=$14.55
Buy

Traditional Metalworking in Kenya (Oxbow Monographs)

Fri, 06 Jun 2008 18:24:46 +0200

Price=$70.00
Buy

Continuity and change in the art of metalworking among the Shona

Sat, 21 Jun 2008 18:33:19 +0200

Price=$-0.01
Buy

Better Homes and Gardens Dandy Dinosaurs (Fun-to-Do Project Books)

Sun, 22 Jun 2008 18:26:16 +0200

Price=$4.95
Buy

COSTA RICA: Construction start-up on first phase $26,000,000 gold mine, GLENCAIRN GOLD CORP. [Canada] - Order #: 044404.: An article from: WWP-Report on Mining, Metal Making and Conversion

Sun, 22 Jun 2008 06:25:26 +0200

This digital document is an article from WWP-Report on Mining, Metal Making and Conversion, published by Worldwide Projects, Inc. on April 1, 2004. The length of the article is 1051 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: COSTA RICA: Construction start-up on first phase $26,000,000 gold mine, GLENCAIRN GOLD CORP. [Canada] - Order #: 044404.
Publication:WWP-Report on Mining, Metal Making and Conversion (Magazine/Journal)
Date: April 1, 2004
Publisher: Worldwide Projects, Inc.
Volume: 13 Issue: 04

Distributed by Thomson Gale
Price=$5.95
Buy

Not all sales are good sales.: An article from: Modern Casting

Sun, 08 Jun 2008 00:26:06 +0200

This digital document is an article from Modern Casting, published by American Foundrymen's Society, Inc. on December 1, 2004. The length of the article is 875 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Not all sales are good sales.
Author: Dan Marcus
Publication:Modern Casting (Magazine/Journal)
Date: December 1, 2004
Publisher: American Foundrymen's Society, Inc.
Volume: 94 Issue: 12 Page: 41(1)

Distributed by Thomson Gale
Price=$5.95
Buy

The World Market for Fully or Partly Automatic Machines and Apparatus for Arc and Plasma Arc Welding of Metal: A 2007 Global Trade Perspective

Thu, 05 Jun 2008 06:24:23 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying fully or partly automatic machines and apparatus for arc and plasma arc welding of metal? What is the dollar value of these imports? How much do the imports of fully or partly automatic machines and apparatus for arc and plasma arc welding of metal vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of fully or partly automatic machines and apparatus for arc and plasma arc welding of metal? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported fully or partly automatic machines and apparatus for arc and plasma arc welding of metal. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

The 2007-2012 World Outlook for Metalworking Stamping, Forging, Extrusion, and Wiredrawing and Straightening Dies

Mon, 23 Jun 2008 12:23:51 +0200

This study covers the world outlook for metalworking stamping, forging, extrusion, and wiredrawing and straightening dies across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-�-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.
Price=$795.00
Buy

Code of Practice for Metalworking Fluids

Fri, 13 Jun 2008 18:22:51 +0200

Price=$-0.01
Buy

The Properties and performance of materials in the coal gasifcation environment: Proceedings of a conference held 8-10 September 1980, Pittsburgh, Pennsylvania ... (Materials/metalworking technology series)

Sun, 08 Jun 2008 18:22:45 +0200

Price=$30.00
Buy

Tool Materials for Molds and Dies: Application and Performance : Proceedings

Sat, 07 Jun 2008 18:29:54 +0200

Price=$65.00
Buy

Creative metalworking

Sat, 07 Jun 2008 18:29:56 +0200

Price=$-0.01
Buy

Twin spindles at work: getting inventory down to a microscopic level.(turning): An article from: Tooling & Production

Tue, 17 Jun 2008 18:31:58 +0200

This digital document is an article from Tooling & Production, published by Nelson Publishing on February 1, 2004. The length of the article is 1109 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Twin spindles at work: getting inventory down to a microscopic level.(turning)
Publication:Tooling & Production (Magazine/Journal)
Date: February 1, 2004
Publisher: Nelson Publishing
Volume: 70 Issue: 2 Page: 22(2)

Distributed by Thomson Gale
Price=$5.95
Buy

A Revolution in Manufacturing: The SMED System

Sat, 07 Jun 2008 18:25:00 +0200

Written by the industrial engineer who developed SMED (single-minute exchange of die) for Toyota, A Revolution in Manufacturing provides a full overview of this powerful just in time production tool. It offers the most complete and detailed instructions available anywhere for transforming a manufacturing environment in ways that will speed up production and make small lot inventories feasible. The author delves into both the theory and practice of the SMED system, explaining fundamentals as well as techniques for applying SMED. The critically acclaimed text is supported with hundreds of illustrations and photographs, as well as twelve chapter-length case studies. ��
Price=$64.00
Buy

Lubricants for pre-painted stock and their removal (SAE)

Sat, 07 Jun 2008 18:31:24 +0200

Price=$-0.01
Buy

The World Market for Numerically Controlled Punching or Notching Machines, Presses, and Combined Punching and Shearing Machines: A 2007 Global Trade Perspective

Tue, 17 Jun 2008 18:26:42 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying numerically controlled punching or notching machines, presses, and combined punching and shearing machines? What is the dollar value of these imports? How much do the imports of numerically controlled punching or notching machines, presses, and combined punching and shearing machines vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of numerically controlled punching or notching machines, presses, and combined punching and shearing machines? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported numerically controlled punching or notching machines, presses, and combined punching and shearing machines. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Canadian metalworking/machine production

Sun, 22 Jun 2008 12:27:40 +0200

Price=$-0.01
Buy

Hi-jet system for increasing tool life (SAE)

Sat, 07 Jun 2008 18:32:05 +0200

Price=$-0.01
Buy

Radius turning on a milling machine

Sat, 21 Jun 2008 18:32:58 +0200

Price=$-0.01
Buy

Mechanical Engineer's Solutions Suite for Machine Design and Metalworking

Mon, 23 Jun 2008 06:20:18 +0200

With this fully interactive electronic book, mechanical engineers can instantly apply the formulas and equations they routinely use in their work. Covering a broad range of formulas, Mechanical Engineer's Solutions Suite provides fast searches for the exact equation required, easy-to-key screen entry fields for plugging in relevant figures or trying different options; and powerful MathCad software for accurate split-second answers. Based on the renowned Standard Handbook of Engineering Calculations by Tyler G. Hicks, Mechanical Engineer's Solutions Suite features text, tables, graphs, diagrams, and other useful reference material. Fully searchable both by index and by key-word, this one-of-a-kind tool offers quick access to equations, formulas, and incomparable source material on tasks from machine design analysis to heat transfer--plus a helpful guide to references.
Price=$75.95
Buy

Steel Detailers' Manual

Fri, 20 Jun 2008 18:27:43 +0200

This highly illustrated manual provides practical guidance on structural steelwork detailing. It:

* describes the common structural shapes in use and how they are joined to form members and complete structures

* explains detailing practice and conventions

* provides detailing data for standard sections, bolts and welds

* emphasises the importance of tolerances in order to achieve proper site fit-up

* discusses the important link between good detailing and construction costs

Examples of structures include single and multi-storey buildings, towers and bridges. The detailing shown will be suitable in principle for fabrication and erection in many countries, and the sizes shown will act as a guide to preliminary design.

The second edition has been updated to take account of changes to standards, including the revisions to BS5950 and includes a new chapter on computer aided detailing.
Price=$98.99
Buy

Precision Tools for Metalworking in Germany: A Strategic Reference, 2006

Mon, 23 Jun 2008 12:24:52 +0200

The primary audience for this report is managers involved with the highest levels of the strategic planning process and consultants who help their clients with this task. The user will not only benefit from the hundreds of hours that went into the methodology and its application, but also from its alternative perspective on strategic planning relating to precision tools for metalworking in Germany. As the editor of this report, I am drawing on a methodology developed at INSEAD, an international business school (www.insead.edu). For any given industry or sector, including precision tools for metalworking, the methodology decomposes a country�s strategic potential along four key dimensions: (1) latent demand, (2) micro-accessibility, (3) proxy operating pro-forma financials, and (4) macro-accessibility. A country may have very high latent demand, yet have low accessibility, making it a less attractive market than many smaller potential countries having higher levels of accessibility. With this perspective, this report provides both a micro and a macro strategic profile of precision tools for metalworking in Germany. It does so by compiling published information that directly relates to latent demand and accessibility, either at the micro or macro level. The reader new to Germany can quickly understand where Germany fits into a firm�s strategic perspective. In Chapter 2, the report investigates latent demand and micro-accessibility for precision tools for metalworking in Germany. In Chapters 3 and 4, the report covers proxy operating pro-forma financials and macro-accessibility in Germany. Macro-accessibility is a general evaluation of investment and business conditions in Germany.
Price=$195.00
Buy

Renaissance Venice, Islam and Mahmud the Kurd: A Metalworking Enigma

Wed, 11 Jun 2008 18:22:59 +0200

Price=$-0.01
Buy

Metallurgy and metalworking in ancient Russia: (Tekhnika obrabotki metalla v drevnei Rusi)

Tue, 10 Jun 2008 18:36:19 +0200

Price=$126.66
Buy

Powder coating TPE compounds.(powder coating clinic): An article from: Products Finishing

Mon, 23 Jun 2008 12:29:00 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on June 1, 2004. The length of the article is 435 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Powder coating TPE compounds.(powder coating clinic)
Author: Nick Liberto
Publication:Products Finishing (Magazine/Journal)
Date: June 1, 2004
Publisher: Gardner Publications, Inc.
Volume: 68 Issue: 9 Page: 32(3)

Distributed by Thomson Gale
Price=$5.95
Buy

The World Market for Metal Tool Sharpening or Cutter Grinding Machines Excluding Numerically Controlled Machines: A 2007 Global Trade Perspective

Sun, 22 Jun 2008 18:29:18 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying metal tool sharpening or cutter grinding machines excluding numerically controlled machines? What is the dollar value of these imports? How much do the imports of metal tool sharpening or cutter grinding machines excluding numerically controlled machines vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of metal tool sharpening or cutter grinding machines excluding numerically controlled machines? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported metal tool sharpening or cutter grinding machines excluding numerically controlled machines. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Die estimating

Sun, 22 Jun 2008 18:32:52 +0200

Price=$-0.01
Buy

INDUSTRY NEWS: ANSI Standards Panel Releases Recommendations.(American National Standards Institute; nanotechnolgy): An article from: Nanoparticle News

Sat, 21 Jun 2008 18:33:39 +0200

This digital document is an article from Nanoparticle News, published by Business Communications Company, Inc. on December 1, 2004. The length of the article is 521 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: INDUSTRY NEWS: ANSI Standards Panel Releases Recommendations.(American National Standards Institute; nanotechnolgy)
Publication:Nanoparticle News (Magazine/Journal)
Date: December 1, 2004
Publisher: Business Communications Company, Inc.
Volume: 7 Issue: 11 Page: NA

Distributed by Thomson Gale
Price=$5.95
Buy

Obsluga pras mimosrodowych

Tue, 17 Jun 2008 18:30:00 +0200

Price=$-0.01
Buy

Proceedings of the 3rd International Conference on Rotary Metalworking Processes

Sun, 22 Jun 2008 18:29:53 +0200

Price=$-0.01
Buy

The 2006-2011 World Outlook for Hobs for Machine Tools and Metalworking Machinery

Wed, 18 Jun 2008 18:30:34 +0200

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The �market� is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for hobs for machine tools and metalworking machinery is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of �unit quantities�, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this re
Price=$795.00
Buy

The World Market for Metal Shaping or Slotting Machines: A 2007 Global Trade Perspective

Wed, 04 Jun 2008 18:18:02 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying metal shaping or slotting machines? What is the dollar value of these imports? How much do the imports of metal shaping or slotting machines vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of metal shaping or slotting machines? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported metal shaping or slotting machines. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Skill needs and training strategies in the Wisconsin metalworking industry: Executive summary

Tue, 10 Jun 2008 18:36:29 +0200

Price=$-0.01
Buy

The 2007-2012 World Outlook for Metalworking and Primarily Metalworking Machine Tools for Home Workshops, Laboratories, and Garages

Sat, 21 Jun 2008 06:20:01 +0200

This study covers the world outlook for metalworking and primarily metalworking machine tools for home workshops, laboratories, and garages across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-�-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.
Price=$795.00
Buy

The Metal Fabrication and Engineering Industries (The Industrial Revolutions, Vol 9)

Sun, 22 Jun 2008 18:30:31 +0200

Price=$100.00
Buy

PF direct: obtain information on YOUR TERMS.(reality check): An article from: Products Finishing

Sun, 22 Jun 2008 12:28:26 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on April 1, 2004. The length of the article is 530 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: PF direct: obtain information on YOUR TERMS.(reality check)
Author: Matthew J. Little
Publication:Products Finishing (Magazine/Journal)
Date: April 1, 2004
Publisher: Gardner Publications, Inc.
Volume: 68 Issue: 7 Page: 6(2)

Distributed by Thomson Gale
Price=$5.95
Buy

How to Do It (How to Do It Series)

Mon, 23 Jun 2008 00:27:46 +0200

Price=$1.01
Buy

Introductory Metalworking (South-Western industrial arts series)

Sun, 22 Jun 2008 18:29:25 +0200

Price=$25.95
Buy

Supplement to Modern Machine Shop: The 1999 Metalworking Technology Guide, April 1999

Sat, 14 Jun 2008 18:32:29 +0200

Price=$15.00
Buy

Woodwork Technology for Schools and Colleges (Technical Studies)

Sat, 07 Jun 2008 18:27:34 +0200

Price=$62.35
Buy

Customized technology helps Swissline land new business.(Swissline Precision): An article from: Tooling & Production

Fri, 20 Jun 2008 18:34:54 +0200

This digital document is an article from Tooling & Production, published by Nelson Publishing on January 1, 2005. The length of the article is 806 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Customized technology helps Swissline land new business.(Swissline Precision)
Publication:Tooling & Production (Magazine/Journal)
Date: January 1, 2005
Publisher: Nelson Publishing
Volume: 71 Issue: 1 Page: 36(2)

Distributed by Thomson Gale
Price=$5.95
Buy

Modern Metalworking

Mon, 23 Jun 2008 06:19:54 +0200

Price=$73.00
Buy

Air rings and air forks.(Quality Gaging Tips): An article from: Modern Machine Shop

Fri, 06 Jun 2008 18:26:21 +0200

This digital document is an article from Modern Machine Shop, published by Gardner Publications, Inc. on February 1, 2005. The length of the article is 858 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Air rings and air forks.(Quality Gaging Tips)
Author: George Schuetz
Publication:Modern Machine Shop (Magazine/Journal)
Date: February 1, 2005
Publisher: Gardner Publications, Inc.
Volume: 77 Issue: 9 Page: 100(2)

Distributed by Thomson Gale
Price=$5.95
Buy

Tooling for metal powder parts: A practical treatment on modern practice in the process planning, tool design, equipment, and operations involved in producing structural parts from metal powders

Sat, 21 Jun 2008 18:33:17 +0200

Price=$20.00
Buy

Occupational wage rates in Arkansas metalworking industries, 1967 (Publication H-19)

Fri, 06 Jun 2008 18:25:25 +0200

Price=$-0.01
Buy

Machine Tools and Metalworking Equipment in Vietnam: A Strategic Entry Report, 1999 (Strategic Planning Series)

Tue, 17 Jun 2008 18:28:51 +0200

The primary audience for this report is managers involved with the highest levels of the strategic planning process, and consultants who help their clients with this task. The user will not only benefit from the hundreds of hours that went into the methodology and its application, but also from its alternative perspective on strategic planning in Vietnam.

This report helps executives evaluate strategic investment and entry alternatives in Vietnam. In order to evaluate Vietnam, Icon Group International, Inc. draws on a methodology developed by Professor Philip Parker at INSEAD in Fontainebleau, France. The methodology decomposes a country's strategic potential along two key dimensions: (1) latent demand, and (2) accessibility. A country may have very high latent demand, yet have low accessibility, making it a less attractive market than many smaller potential countries having higher levels of accessibility.

This report provides a strategic profile of Vietnam along these lines. Throughout the discussion, literally hundreds of statistics on Vietnam are benchmarked against regional and global averages. The reader can thus quickly understand where Vietnam fits into the regional and global perspective. The report first investigates the economic fundamentals affecting Vietnam. These fundamentals are the source for Vietnam's latent demand. Then, the subsequent chapters detail Vietnam's accessibility. This evaluation covers a number of entry alternatives, including export strategies, and local direct investment strategies. If a firm decides to have a local presence in Vietnam, this requires a strategic understanding of local business conditions. The conditions investigated in this report include local marketing (advertising, distribution, pricing issues) and entry strategies (opening an office, joint venturing, etc.), as well as human resources management (labor laws, costs, regulations). Because local...
Price=$495.00
Buy

The 2007-2012 World Outlook for Metalworking and Other Power Saw Blades and Accessories

Tue, 10 Jun 2008 12:18:11 +0200

This study covers the world outlook for metalworking and other power saw blades and accessories across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-�-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.
Price=$795.00
Buy

Grinders get open architecture CNC.(CNC controls): An article from: Tooling & Production

Sun, 22 Jun 2008 00:28:49 +0200

This digital document is an article from Tooling & Production, published by Nelson Publishing on February 1, 2004. The length of the article is 693 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Grinders get open architecture CNC.(CNC controls)
Publication:Tooling & Production (Magazine/Journal)
Date: February 1, 2004
Publisher: Nelson Publishing
Volume: 70 Issue: 2 Page: 46(1)

Distributed by Thomson Gale
Price=$5.95
Buy

INDIA: Construction plans for proposed $595,000,000 steel complex and associated power plant and facilities, JINDAL STEEL & POWER LTD. (JSPL) [India] - ... on Mining, Metal Making and Conversion

Sat, 07 Jun 2008 18:32:13 +0200

This digital document is an article from WWP-Report on Mining, Metal Making and Conversion, published by Worldwide Projects, Inc. on February 1, 2005. The length of the article is 1529 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: INDIA: Construction plans for proposed $595,000,000 steel complex and associated power plant and facilities, JINDAL STEEL & POWER LTD. (JSPL) [India] - Order #: 027805.
Publication:WWP-Report on Mining, Metal Making and Conversion (Magazine/Journal)
Date: February 1, 2005
Publisher: Worldwide Projects, Inc.
Volume: 13 Issue: 02

Distributed by Thomson Gale
Price=$5.95
Buy

A catalog of performance objectives, criterion-referenced measures, and performance guides for the job titles die designer and jig and fixture designer (V-TECS catalog)

Sun, 22 Jun 2008 18:31:02 +0200

Price=$-0.01
Buy

Duties and standards: Diemaking skills, level II and III

Fri, 20 Jun 2008 00:26:27 +0200

Price=$-0.01
Buy

The World Market for Metal-Rolling Mills Including Its Rolls and Other Parts: A 2007 Global Trade Perspective

Sat, 07 Jun 2008 18:31:14 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying metal-rolling mills including its rolls and other parts? What is the dollar value of these imports? How much do the imports of metal-rolling mills including its rolls and other parts vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of metal-rolling mills including its rolls and other parts? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported metal-rolling mills including its rolls and other parts. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Molten Metal Technology (A) and (B); Teaching Note

Mon, 23 Jun 2008 12:27:21 +0200

Price=$-0.01
Buy

Using Wood and Metal in the Workshop

Mon, 16 Jun 2008 18:30:53 +0200

Price=$8.35
Buy

Beitrag zur beanspruchungsgerechten Auslegung von rotationssymmetrischen Fliesspressmatrizen (Berichte aus dem Institut fur Umformtechnik, Universitat Stuttgart ; 49)

Mon, 23 Jun 2008 06:22:38 +0200

Price=$-0.01
Buy

ENERGY AND ENVIRONMENT: EPA Doles Out $4 Million for Environmental Research.(Environmental Protection Agency): An article from: Nanoparticle News

Fri, 20 Jun 2008 18:34:47 +0200

This digital document is an article from Nanoparticle News, published by Business Communications Company, Inc. on December 1, 2004. The length of the article is 2355 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: ENERGY AND ENVIRONMENT: EPA Doles Out $4 Million for Environmental Research.(Environmental Protection Agency)
Publication:Nanoparticle News (Magazine/Journal)
Date: December 1, 2004
Publisher: Business Communications Company, Inc.
Volume: 7 Issue: 11 Page: NA

Distributed by Thomson Gale
Price=$5.95
Buy

The market potential for American metalworking machine tools in the Soviet Union (Working paper)

Mon, 23 Jun 2008 12:29:32 +0200

Price=$-0.01
Buy

Handbook of Die Design

Sat, 21 Jun 2008 18:27:24 +0200

This classic handbook provides the major formulas, calculations, cost estimating techniques, and safety procedures needed for specific die operations and performance evaluations.
Price=$100.00
Buy

The World Market for Numerically Controlled Shearing Machines and Presses Excluding Combined Punching and Shearing Machines: A 2007 Global Trade Perspective

Sun, 15 Jun 2008 18:23:12 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying numerically controlled shearing machines and presses excluding combined punching and shearing machines? What is the dollar value of these imports? How much do the imports of numerically controlled shearing machines and presses excluding combined punching and shearing machines vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of numerically controlled shearing machines and presses excluding combined punching and shearing machines? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported numerically controlled shearing machines and presses excluding combined punching and shearing machines. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Tribology in metal-working, new developments: Conference sponsored [i.e. organised] by the Tribology Group of the Institution of Mechanical Engineers and ... 1980 (I Mech E conference publications)

Sun, 22 Jun 2008 18:30:21 +0200

Price=$79.20
Buy

Practical machine shop theory for metalworking trainees: Machine tool operators, machinists, toolmakers, diemakers, moldmakers, special machine builders ... Machining Association textbook series)

Mon, 02 Jun 2008 12:20:27 +0200

Price=$-0.01
Buy

Metalworking; Alcohol Fuels; Firearms; Nuclear Survival

Sun, 22 Jun 2008 20:11:10 +0200

US $9.99 (0 Bid)
End Date: Friday Jun-27-2008 9:07:50 PDT
Bid now | Add to watch list
Price=$9.99
Buy

A secret weapon--again.(Mark: my word): An article from: Modern Machine Shop

Sat, 07 Jun 2008 12:23:36 +0200

This digital document is an article from Modern Machine Shop, published by Gardner Publications, Inc. on February 1, 2005. The length of the article is 412 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: A secret weapon--again.(Mark: my word)
Author: Mark Albert
Publication:Modern Machine Shop (Magazine/Journal)
Date: February 1, 2005
Publisher: Gardner Publications, Inc.
Volume: 77 Issue: 9 Page: 10(1)

Distributed by Thompson Gale
Price=$5.95
Buy

Metal trades and crafts: Including blacksmithing, tinsmithing and pewtering (Publication series 1, Living history resource series)

Sat, 14 Jun 2008 18:31:48 +0200

Price=$-0.01
Buy

Secrets of winning employee cooperation.(management methods): An article from: Products Finishing

Mon, 23 Jun 2008 12:29:22 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on February 1, 2004. The length of the article is 1484 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Secrets of winning employee cooperation.(management methods)
Author: Ted Pollock
Publication:Products Finishing (Magazine/Journal)
Date: February 1, 2004
Publisher: Gardner Publications, Inc.
Volume: 68 Issue: 5 Page: 8(3)

Distributed by Thomson Gale
Price=$5.95
Buy

Rural Blacksmith, Rural Businessman

Mon, 23 Jun 2008 12:28:09 +0200

This resource pack shows how life really is for the rural blacksmith. Includes notes and two slide sets to actively involve students in discussion on design and technology from other cultures.
Price=$43.95
Buy

The 2006-2011 World Outlook for Press Brake Metalworking Dies

Tue, 10 Jun 2008 12:18:06 +0200

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The �market� is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for press brake metalworking dies is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of �unit quantities�, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollar
Price=$795.00
Buy

Urartu: A metalworking center in the first millennium B.C.E (Cat)

Sat, 31 May 2008 18:28:05 +0200

Price=$-0.01
Buy

Physical Vapor Deposition Processes.: An article from: Products Finishing

Wed, 28 May 2008 18:22:11 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on September 1, 2001. The length of the article is 4190 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Physical Vapor Deposition Processes.
Author: Donald M. Mattox
Publication:Products Finishing (Magazine/Journal)
Date: September 1, 2001
Publisher: Gardner Publications, Inc.
Volume: 65 Issue: 12 Page: 72

Distributed by Thomson Gale
Price=$5.95
Buy

If 5S is good, try 13S next.(The Z Axis): An article from: Modern Machine Shop

Thu, 12 Jun 2008 18:34:36 +0200

This digital document is an article from Modern Machine Shop, published by Gardner Publications, Inc. on February 1, 2005. The length of the article is 469 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: If 5S is good, try 13S next.(The Z Axis)
Author: Peter C. Zelinski
Publication:Modern Machine Shop (Magazine/Journal)
Date: February 1, 2005
Publisher: Gardner Publications, Inc.
Volume: 77 Issue: 9 Page: 12(1)

Distributed by Thomson Gale
Price=$5.95
Buy

Applications of lasers in materials processing: Proceedings of a conference, 18-20 April 1979, Washington, D.C (Materials/metalworking technology series)

Tue, 10 Jun 2008 18:35:51 +0200

Price=$5.48
Buy

The World Market for Machines for Working Wire: A 2007 Global Trade Perspective

Mon, 16 Jun 2008 18:32:43 +0200

On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying machines for working wire? What is the dollar value of these imports? How much do the imports of machines for working wire vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of machines for working wire? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported machines for working wire. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
Price=$325.00
Buy

Geographie de la metallurgie de transformation (Collection Geographie)

Wed, 18 Jun 2008 18:35:12 +0200

Price=$-0.01
Buy

Ochistka tekhnologicheskikh sred pri obrabotke metallov rezaniem

Sat, 07 Jun 2008 18:29:46 +0200

Price=$-0.01
Buy

Metalworking in the Home Shop: Tools, Techniques, Projects

Sun, 01 Jun 2008 18:25:06 +0200

Price=$14.95
Buy

Take the e-biz quiz: how much e-biz does your business really need? (Management Update).(business on the Internet): An article from: Tooling & Production

Sun, 01 Jun 2008 18:25:08 +0200

This digital document is an article from Tooling & Production, published by Nelson Publishing on May 1, 2001. The length of the article is 2020 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Take the e-biz quiz: how much e-biz does your business really need? (Management Update).(business on the Internet)
Author: Allen L. Pinkus
Publication:Tooling & Production (Magazine/Journal)
Date: May 1, 2001
Publisher: Nelson Publishing
Volume: 67 Issue: 2 Page: 23(3)

Distributed by Thomson Gale
Price=$5.95
Buy

In memory of Lawrence J. Durney.(reality check): An article from: Products Finishing

Mon, 23 Jun 2008 12:29:23 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on June 1, 2004. The length of the article is 463 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: In memory of Lawrence J. Durney.(reality check)
Author: Gerard H., Jr. Poll
Publication:Products Finishing (Magazine/Journal)
Date: June 1, 2004
Publisher: Gardner Publications, Inc.
Volume: 68 Issue: 9 Page: 6(1)

Distributed by Thomson Gale
Price=$5.95
Buy

Estimating painting job cost.(painting clinic): An article from: Products Finishing

Tue, 17 Jun 2008 18:31:53 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on January 1, 2005. The length of the article is 348 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Estimating painting job cost.(painting clinic)
Author: Carl Izzo
Publication:Products Finishing (Magazine/Journal)
Date: January 1, 2005
Publisher: Gardner Publications, Inc.
Volume: 69 Issue: 4 Page: 21(1)

Distributed by Thomson Gale
Price=$5.95
Buy

The 2006-2011 World Outlook for Indexible and Throwaway Insert-Type Complete Milling Cutters for Machine Tools and Metalworking Machinery

Mon, 16 Jun 2008 12:19:27 +0200

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The �market� is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for indexible and throwaway insert-type complete milling cutters for machine tools and metalworking machinery is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of �unit quantities�, only total latent revenues (i.e., a calculation of price times quantity is never
Price=$795.00
Buy

CAD input for EDM.(Metalworking Technology In Brief): An article from: Modern Machine Shop

Sun, 22 Jun 2008 18:33:04 +0200

This digital document is an article from Modern Machine Shop, published by Gardner Publications, Inc. on February 1, 2005. The length of the article is 584 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: CAD input for EDM.(Metalworking Technology In Brief)
Author: Mark Albert
Publication:Modern Machine Shop (Magazine/Journal)
Date: February 1, 2005
Publisher: Gardner Publications, Inc.
Volume: 77 Issue: 9 Page: 54(3)

Distributed by Thomson Gale
Price=$5.95
Buy

Drying parts, Part 2.(mass finishing): An article from: Products Finishing

Fri, 20 Jun 2008 18:34:46 +0200

This digital document is an article from Products Finishing, published by Gardner Publications, Inc. on January 1, 2004. The length of the article is 2636 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Drying parts, Part 2.(mass finishing)
Author: Steve Marcus
Publication:Products Finishing (Magazine/Journal)
Date: January 1, 2004
Publisher: Gardner Publications, Inc.
Volume: 68 Issue: 4 Page: 44(2)

Distributed by Thomson Gale
Price=$5.95
Buy

The 2007-2012 World Outlook for Metalworking Carbide Extrusion and Wiredrawing and Straightening Dies

Wed, 18 Jun 2008 18:30:33 +0200

This study covers the world outlook for metalworking carbide extrusion and wiredrawing and straightening dies across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-�-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.
Price=$795.00
Buy

Iron Age metalworking in the Magaliesberg area

Tue, 10 Jun 2008 18:37:48 +0200

Price=$-0.01
Buy

Opportunities for small metalworking industries (Resource-industry series)

Mon, 23 Jun 2008 06:24:48 +0200

Price=$-0.01
Buy

Astm International Metalworking Industry Standards: Environmental Quality and Safety, Fluid Performance and Condition Monitoring Tests

Sun, 08 Jun 2008 18:22:17 +0200

Optimal selection and use of metalworking fluids depends on multiple factors, including raw material selection, fluid formulation, water quality, in-process fluid management and good industrial hygiene practices. This new ASTM publication provides 39 standard test methods, practices, and guides, which are used to determine whether fluid properties are changing in a direction or at a rate that is likely to result in performance decline, increased worker health risk or both.

Audience: An excellent technical resource for operational and supervisory personnel employed by metalworking fluid compounders, fluid management service personnel, industrial hygienists, labor representatives and regulatory agency personnel responsible for fluid development and performance, industrial health and safety and system management.
Price=$94.48
Buy

Multilingual Dictionary of Metallurgy and Metalworking

Sat, 07 Jun 2008 18:29:07 +0200

Price=$395.00
Buy

Metalworking: The Best of Projects in Metal 1990-1991 (Metalworking)

Fri, 06 Jun 2008 18:25:05 +0200

Price=$32.00
Buy

Metalworking fundamentals

Sat, 14 Jun 2008 18:34:20 +0200

Price=$-0.01
Buy